Moisture monitoring module type ABS CA 441 – Thetys Pumps

fade

page-template,page-template-full-width,page-template-full-width-php,page,page-id-9095,page-child,parent-pageid-8873,eltd-core-1.3,averly-ver-1.8,eltd-smooth-scroll,eltd-smooth-page-transitions,eltd-mimic-ajax,eltd-grid-1200,eltd-blog-installed,eltd-main-style1,eltd-disable-fullscreen-menu-opener,eltd-header-standard,eltd-sticky-header-on-scroll-down-up,eltd-default-mobile-header,eltd-sticky-up-mobile-header,eltd-dropdown-default,eltd-,eltd-fullscreen-search eltd-search-fade,eltd-enable-sidemenu-area-opener,eltd-side-menu-slide-with-content,eltd-width-370,wpb-js-composer js-comp-ver-5.6,vc_responsive

Moisture monitoring module type ABS CA 441

Thetys Pumps / Products / Control and monitoring equipment / Pump monitoring and control accessories / Moisture monitoring module type ABS CA 441

Moisture monitoring module type ABS CA 441

Advanced leakage alerter

The CA 441 performs leakage monitoring on submersible pumps. With four signal inputs, it monitors up to four individual pumps or one pump with separate alarms. The unit can be mounted either in the cabinet or up to 250 meters away from the pump (when using the same earth potential). CA 441 can only be used in combination with the PC 441 monitoring/controller unit.

Main design features

The CA 441 monitors leakage on either:

up to four individual pumps with combined alarms (e.g. XFP pumps in the PE1 & PE2 series), or
one individual pump with separate alarms for the cable connection chamber, the motor compartment, and the inspection chamber (e.g. a large XFP, AFLX, or VUPX pump)

It features a CAN-bus interface for managing a local or remote connection to the PC 441 monitoring/controller device.

Key characteristics