The Synconta 901B and 902B is a single or double pumping station, ideal for automatic pumping of wastewater and sewage from locations and areas below the backwash level in accordance with EN 12050-1 and where gravity discharge into the sewer is not possible.
Main benefits
Designed as a complete wastewater sump, and for fitting with pumps from the Piranha, AS and MF ranges.
Simple pump installation and maintenance—no need to enter the sump
Pump seals automatically onto the discharge line when lowered into the high level coupling, irrespective of the inflow or direction of the discharge lines
Submersible grinder pump type ABS Piranha with shredding system hydraulics can cut wastewater containing solids and pump it through small diameter discharge lines from 1¼”
A concrete cover is available for areas where there can be either pedestrian or vehicular traffic (available as an accessory). The tank can be fitted with a plastic lockable lid where installations are removed from all forms of traffic e.g. garden flower beds.
Level control is by one of three options; pressure pipe, float switch or float sensor
Four inflow ports (3 x DN 150, 1 x DN 200) for DIN push-on connection. Two DN 100 ports for venting and use as a cable duct
The pipework and gate valves are made of high quality stainless steel
Stainless steel discharge pipe with 1¼” (901B), or 1½” (902B) external thread
Corrosion-resistant polyethelyne tank in accordance with EN 12050-1. Supplied as standard with high-level coupling and bracket, ball type non-return valve and shut-off valve