Dual-shafted grinder

• Proven low-speed, high-torque dual shafted grinding which can shred the toughest solids
• Grinds debris smaller than single-shafted machines
• Grinding separates organic from inorganic materials in the waste stream

High-flow screening drums

• High flow screening drums to prevent bypass of unshredded solids without compromising flow
• Standard stainless steel 12 mm perforated drums

Automated monitoring and controls

• Protect pumps and other critical equipment from costly clogs and damage from tough solids
• Auto load sensing reduce interrupts and protects the system from damage
• Adaptive to custom requirements and plant SCADA systems
• Stores operational data

Wipes Ready™ technology

• Wipes Ready technology available which prevents materials from forming long strips and reweaving in the waste stream

Lower operating cost

• Clear pipes and pumps means shorter pump run cycles and lower electrical costs

The Channel Monster™ sewage grinders are designed to capture and grind down the toughest wastewater solids in high-flow systems such as:

• Pump stations where tough solids need to be ground up
• High flows at the plant’s headworks

Wipes Ready™ Technology

Channel Monster sewage grinders are available with the unique Wipes Ready™ suite of technologies. It was designed to capture all wipes in the waste stream and shred them into small pieces that will not reweave into a ragball in sewage systems.

The Wipes Ready technologies applied in Channel Monster sewage grinders are:

• Wipes Ready cutters* – A combination of serrated cutters and knurled spacers cuts wipes in two directions. The result is smaller particles that cannot reweave downstream.
• Delta P Side Rails* – Direct solids into the cutters without sacrificing flow rate and prevent debris build-up in the grinder
• Optimized cut control (OCC)* – The OCC gear ratio optimizes shaft speeds to enhance the cutting action and cleaning of the cutters, which in turn improves the performance and life of the grinder.

* Patent pending